82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA] ASME B 18.6.3 (H1B-I/H1B-IA) - 2024
| 選擇規格尺寸 點擊↓ 0# 1# 2# 3# 4# 5# 6# 8# 10# 12# 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 |
尺寸單位:
inch
|
|
![美標ASME B18.6.3 (H1B-I/H1B-IA) - 2024 ASM 82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]](https://imgcc.164580.com/upload/48/pic/2023/12/07/1701929142294934203.jpg)
![ASME B 18.6.3 (H1B-I/H1B-IA) - 2024 82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]](https://imgcc.164580.com/upload/48/qrcode_standardurl/24907.png)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,頭部邊緣為倒圓或平的。 ②,小于等于表中長度的螺釘，為清根沉頭型。 ③,機械螺釘的螺紋長度： 1）螺紋規格≤5#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 1-1/8 in 的，允許頭下肩距最大不超過2倍螺距。 若無其他規定，長螺釘的最小螺紋長度為1 in 。 2）螺紋規格≥6#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 2 in 的，允許頭下螺紋肩距最大不超過2倍螺距。 若無其他規定，長螺釘的最小螺紋長度為 1.5 in 。 |
同版本產品組
機械螺釘長度公差表
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
標稱螺釘尺寸的長度公差 | |||
標稱螺釘長度 | 螺紋規格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
引用參考
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息
| 1 |
|
[國標] GB /T 819.1 - 2016 |
十字槽沉頭螺釘 第1部分：4.8級 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供應商(10) |
| 2 |
|
[國標] GB /T 819.2 - 2016 |
十字槽沉頭螺釘 第2部分：8.8級、不銹鋼及有色金屬螺釘 Countersunk Flat Head Screws with Cross Recess - Part 2: Property Class 8.8, Stainless Steel Screws and Non-ferrous Metal Screws 供應商(1) |
| 3 |
|
[國標] GB /T 819.1 - 2000 |
十字槽沉頭螺釘 4.8級 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供應商(10) |
| 4 |
|
[國標] GB /T 819.2 - 1997 |
十字槽沉頭螺釘 第2部分：鋼8.8級、不銹鋼A2-70和有色金屬螺釘CU2或CU3 Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Part 2: Steel of Property Class 8.8, Stainless and Non-Ferrous Metals 供應商(1) |
| 5 |
|
[國標] GB /T 13806.1 (B) - 1992 |
精密機械用緊固件十字槽沉頭螺釘 Cross Recessed Countersunk Screws for Fine Mechanics 供應商(1) |
| 6 |
|
[國標] GB 819 - 1985 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws 供應商(10) |
| 7 |
|
[國標] GB 819 - 1976 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws 供應商(10) |
| 8 |
|
[德標] DIN 965 - 1990 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws 供應商(7) |
| 9 |
|
[德標] DIN 34811 - 1999 |
塑料米字槽沉頭螺釘 Plastic Flat Head Screws with Cross Recess |
| 10 |
|
[國際] ISO 7046 (-2) - 2011 |
8.8 級、不銹鋼及有色金屬 十字槽沉頭螺釘 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Property Class 8.8 供應商(1) |
| 11 |
|
[國際] ISO 7046-2 - 1990 |
8.8 級、不銹鋼及有色金屬 十字槽沉頭螺釘 Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Steel of Property Class 8.8, stainless Steel and Nonferrous Metals 供應商(1) |
| 12 |
|
[國際] ISO 7046 (-1) - 2011 |
4.8級十字槽沉頭螺釘 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Steel Screws of Property Class 4.8 |
| 13 |
|
[國際] ISO 5856 - 2008 |
航空航天 強度≤1100Mpa 金屬材料 標準桿 短或中等長度MJ螺紋 偏十字槽 100°沉頭螺釘 Aerospace - Screws, 100 Degrees Normal Countersunk Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal To 1100 Mpa - Dimensi |
| 14 |
|
[國際] ISO 7046-1 - 1994 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws |
| 15 |
|
[日標] JIS B 1111 (JA4) - 2017 |
十字槽沉頭螺釘 [附屬表 JA.4] Cross Recessed Countersunk Head Screws 供應商(1) |
| 16 |
|
[日標] JIS B 1111 (T6) - 2017 |
十字槽沉頭螺釘 4.8級 [表6] Cross Recessed Countersunk Head Screws - Class 4.8 |
| 17 |
|
[日標] JIS B 1111 (T9) - 2017 |
十字槽沉頭螺釘 8.8級 [表9] Cross Recessed Countersunk Head Screws - Class 8.8 |
| 18 |
|
[日標] JIS B 1111 (T2) - 2006 |
十字槽沉頭螺釘 4.8級 [表2] Cross Recessed Countersunk Head Screws - Class 4.8 |
| 19 |
|
[日標] JIS B 1111 (T3) - 2006 |
十字槽沉頭螺釘 8.8級 [表3] Cross Recessed Countersunk Head Screws - Class 8.8 |
| 20 |
|
[日標] JIS B 1111 (T3) - 1996 |
十字槽沉頭螺釘 8.8級 [表3] Cross Recessed Countersunk Head Screws - Class 8.8 |
| 21 |
![十字槽沉頭螺釘 4.8級 [表2]](https://imgccc.164580.com/upload/48/pic/2024/03/22/1711077659454717016.jpg)
|
[日標] JIS B 1111 (T2) - 1996 |
十字槽沉頭螺釘 4.8級 [表2] Cross Recessed Countersunk Head Screws - Class 4.8 |
| 22 |
|
[汽標代號] Q 254 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws |
| 23 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
十字槽沉頭螺釘Table2 Cross Recessed Countersunk Head Screws |
| 24 |
|
[美標] ASME/ANSI B 18.6.7M - 1998 |
米制十字槽沉頭螺釘Table3 Metric Cross Recessed Countersunk Screws |
| 25 |
|
[美標] ASME/ANSI B 18.6.7M - 1998 |
米制米字槽沉頭螺釘Table4 Metric PZ Drives Countersunk Head Screws |
| 26 |
|
[歐標] EN 4162 - 2016 |
航空航天 - 100°沉頭螺釘 偏十字槽 鍍鎘 合金鋼 中等螺紋長度 粗公差普通桿 等級：1100MPa(室溫)/235℃ Aerospace Series - Screws, 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - 1100 MPa (at Ambient Temperature)/235 °C |
| 27 |
|
[歐標] EN 2940 - 1995 |
航空航天系列 鍍銀FE-PA92HT(A286)耐熱鋼制全螺紋偏置十字凹槽100°沉頭螺釘 等級:900MPa(環境溫度)/650℃ Aerospace Series - Screws, 100° Countersunk Head, Offset Cruciform Recess, Threaded To Head, in Heat Resisting Steel Fe-pa92ht (A286), Silver Plated - Classification: 900 Mpa (At Ambient Temperature)/650℃ |
| 28 |
|
[意大利] UNI 7688 - 1977 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws |
| 29 |
|
[法國] NF E 25-119-1 - 1994 |
4.8級十字槽沉頭螺釘 Countesunk Flat Head Screws,with Type H or Type Z Cross Recessed - Product Grade A, Class 4.8 |
| 30 |
|
[法國] NF E 25-119-2 - 1994 |
8.8級十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws - Grade A, Class 8.8 |
| 31 |
|
[法國] NF L 22-161 - 1984 |
十字槽100°沉頭螺栓 符合N FL22-072 Bolt, 100 Degrees Countersunk Head, Current Use, NF L 22-072 Cross Recess |
| 32 |
|
[英標] BS 1981 - 1991 |
米字槽沉頭螺釘（短的）Table 7 Recessed Truncated Countersunk Head Screws:short Length |
| 33 |
|
[英標] BS 1981 - 1991 |
米字槽沉頭螺釘Table4 Recessed Truncated Countersunk Head Screws: Long Length |
| 34 |
|
[英標] BS 450 - 1958 |
英制十字槽沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 2] Cross Recessed 90° Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 2] |
| 35 |
|
[澳標] AS /NZS 1427 - 1996 |
米制十字槽沉頭螺釘 [Table 1] ISO Metric Cross-Recess Countersunk Screws [Table 1] |
| 36 |
|
[臺灣] CNS 4560 - 1981 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws |
| 37 |
|
[俄標] GOST 17475 - 1980 |
十字槽沉頭螺釘 A級和B級 Countersunk Head Screws of Accuracy Classes A and B (Cross Recessed) |
| 38 |
|
[韓標] KS B 1023 (T7) - 2016 (R2021) |
4.8級十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws - Class 4.8 |
| 39 |
|
[韓標] KS B 1023 (T8) - 2016 (R2021) |
8.8級及有色金屬十字槽沉頭螺釘 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8 |
| 40 |
|
[韓標] KS B 1023 (T2) - 2001 |
4.8級十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws - Class 4.8 |
| 41 |
|
[韓標] KS B 1023 (T3) - 2001 |
8.8級及有色金屬十字槽沉頭螺釘 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8 |
| 42 |
|
[德標] DIN EN ISO 7046-1 - 2011 |
十字槽沉頭螺釘（通用頭型）- 4.8級，鋼制，產品等級A級 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8 供應商(7) |
| 43 |
|
[德標] DIN EN ISO 7046-2 - 2011 |
8.8 級、不銹鋼及有色金屬 十字槽沉頭螺釘 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - property Class 8.8 供應商(6) |
| 44 |
|
[軍標] GJB 3371 (/57~/60) - 1998 |
十字槽100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws |
| 45 |
|
[軍標] GJB 3371 (/62) - 1998 |
光桿公差帶f9 十字槽100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws，Shank Tolerance f9 |
| 46 |
|
[軍標] GJB 3371 (/64) - 1998 |
光桿公差帶h8短螺紋十字槽 100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance h8 |
| 47 |
|
[軍標] GJB 3371 (/68) - 1998 |
十字槽 100°錐端沉頭螺栓 Cross Recessed 100° Countersunk Head Screws with Cone Point |
| 48 |
|
[軍標] GJB 3371 (/84) - 1998 |
光桿公差帶r6短螺紋十字槽 100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance r6 |
| 49 |
|
[軍標] GJB 3372 (/45~/48) - 1998 |
十字槽100°沉頭螺釘 Cross Recessed 100° Countersunk Head Screws |
| 50 |
|
[軍標] GJB 3372 (/49~/52) - 1998 |
十字槽100°小沉頭螺釘 Cross Recessed 100 ° Small Countersunk Head Screw |
| 51 |
|
[軍標] GJB 3374 (/29) - 1998 |
MJ螺紋十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed |
| 52 |
|
[軍標] GJB 3374 (/30) - 1998 |
MJ螺紋光桿公差帶f9十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed, Shank Tolerance f9 |
| 53 |
|
[軍標] GJB 3374 (/31) - 1998 |
MJ螺紋十字槽100°沉頭錐端螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed |
| 54 |
|
[軍標] GJB 3374 (/32) - 1998 |
MJ螺紋光桿公差帶h8短螺紋十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed, Short Thread, Shank Tolerance h8 |
| 55 |
|
[軍標] GJB 3374 (/33) - 1998 |
MJ螺紋光桿公差帶r6短螺紋十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed, Short Thread, Shank Tolerance r6 |
| 56 |
|
[印標] IS 7485 (-1) - 2005 |
H型或Z型 十字槽沉頭螺釘（普通頭）產品等級A Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A |
| 57 |
|
[印標] IS 7485 - 1985 (R2001) |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws |
| 58 |
|
[波蘭標] PN 82208 |
90°米字槽沉頭螺釘 90° Cross Recess Countersunk Flat Head Screws |
| 59 |
|
[美標] ASME B 18.6.3 (H1D-I/H1D-IA) - 2024 |
100°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-4 I/IA] 100° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-4 I/IA] |
| 60 |
|
[美標] ASME B 18.6.3 (H1F-I/H1F-IA) - 2024 |
精密100°沉頭十字槽機械螺釘 [TABLE 2.2.1-6 I/IA] Close Tolerance 100-deg Flat Countersunk Head Screws [TABLE 2.2.1-6 I/IA] |
| 61 |
![十字槽82°沉頭清根機械螺釘 I型和IA型 [TABLE 2.2.3-2 I/IA]](https://imgccc.164580.com/upload/48/pic/2023/11/21/1700551788136057865.jpg)
|
[美標] ASME B 18.6.3 (H3B-I/H3B-IA) - 2024 |
十字槽82°沉頭清根機械螺釘 I型和IA型 [TABLE 2.2.3-2 I/IA] Undercut 82-deg Flat Countersunk Head Screws,Type I and IA [TABLE 2.2.3-2 I/IA] |
| 62 |
![82°小沉頭十字槽螺釘 (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA]](https://imgccc.164580.com/upload/48/pic/2023/11/15/1700012688566954158.jpg)
|
[美標] ASME B 18.6.3 (H4A) - 2024 |
82°小沉頭十字槽螺釘 (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA] 82° Flat Coutersunk Trim Head Screws (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA] |
| 63 |
|
[美標] ASME B 18.6.3 (T13) - 2013 |
82°小沉頭十字槽螺釘 [Table 13] (ASTM F837 / F468) 82° Flat Coutersunk Trim Head Screws [Table 13] (ASTM F837 / F468) |
| 64 |
![82°十字槽沉頭螺釘 [Table 2] (ASTM F837, F468)](https://imgccc.164580.com/upload/48/pic/2023/12/07/1701929142643948965.jpg)
|
[美標] ASME B 18.6.3 (T2-I/T2-IA) - 2013 |
82°十字槽沉頭螺釘 [Table 2] (ASTM F837, F468) 82° Cross Recessed Countersunk Head Screws [Table 2] (ASTM F837, F468) |
| 65 |
|
[美標] ASME B 18.6.3 (T4-I/T4-IA) - 2013 |
100°十字槽沉頭螺釘 [Table 4] (ASTM F837, F468) 100° Cross Recessed Countersunk Head Screws [Table 4] (ASTM F837, F468) |
| 66 |
|
[美標] ASME B 18.6.3 (T6-I/T6-IA) - 2013 |
100°十字槽沉頭精整螺釘 Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) |
| 67 |
|
[美標] ASME B 18.6.3 (T10-I/T10-IA) - 2013 |
十字槽82°沉頭清根機械螺釘 Undercut 82-deg Flat Countersunk Head Screws，Type I and IA |
| 68 |
|
[航天] QJ 2584 (A) - 2011 |
鈦合金十字槽沉頭螺釘 Countersunk Head Screws with Cross Recess in Titanium Alloys |
| 69 |
|
[航天] QJ 2584 - 1993 |
鈦合金十字槽沉頭螺釘 Countersunk Head Screws with Cross Recess in Titanium Alloys |
| 70 |
|
[航天] QJ 2377 - 1992 |
十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws |
| 71 |
|
[航空] HB 1- 208 - 1995 |
十字槽120°沉頭螺釘 Cross Recess 120° Countersunk Head Screw 供應商(1) |
| 72 |
|
[航空] HB 1-206 - 2002 |
十字槽90°沉頭螺釘 90° Countersunk Head Screw with Cross Recess |
| 73 |
|
[航空] HB 7196~7199 (7196/7197/7198/7199) - 1995 |
十字槽100°沉頭螺釘（帶孔或不帶孔） Cross Recessed 100° Countersunk Head Screws |
| 74 |
|
[航空] HB 6565 - 1992 |
鈦合金光桿公差帶f9高扭矩十字槽100°沉頭螺栓 Titanium Alloy Smooth Rod Tolerance Zone f9 High Torque Cross Groove 100° Countersunk Head Bolt |
| 75 |
|
[深圳緊固件行業協會標準] T/SZJGJ 001 (E) - 2024 |
十字槽沉頭機器螺釘 Cross Recessed Countersunk Head Screws |
標準編號 / Standard Code：
ASME B 18.6.3 (H1B-I/H1B-IA) - 2024
中文名稱 / Chinese Name： 82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
英文名稱 / English Name： 82° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
中文名稱 / Chinese Name： 82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
英文名稱 / English Name： 82° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
Data Source:
YJT Fastener Database (164580.com)
Standard: ASME B 18.6.3 (H1B-I/H1B-IA) - 2024
Chinese Name: 82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
English Name: 82° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
Standard: ASME B 18.6.3 (H1B-I/H1B-IA) - 2024
Chinese Name: 82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
English Name: 82° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
© 易緊通 服務熱線：4006-164580（免長途費）